Do you provide custom design services?
What the Custom Design Service Includes
Yes. Custom design is the core of what MAGEON does - roughly 70% of the chassis we ship are built to a customer specification rather than a catalogue item. The service covers the full chain from a blank requirement sheet to a load-tested production unit.
| Stage | What we deliver | Your involvement |
|---|---|---|
| Requirement review | List of gaps and any technical risks in the stated requirement | Answer our questions accurately - this stage is where most fit-up problems are caught |
| Concept proposal | Layout options with 2D drawings and an initial load calculation | Select the direction you prefer |
| 3D modelling | Full 3D model of frame, roller arrangement, sprocket position and drive interface | Review for clearance, access and interference |
| Structural verification | FEA stress and deflection analysis under rated and overload conditions | Confirm the duty cycle matches your real work |
| Drawing freeze | Manufacturing drawing with tolerances, weld procedure and inspection points | Sign off - this becomes the contract document |
| Prototype and test | Prototype build plus load test report | Witness the test if you wish |
| Production | Manufacture to the frozen drawing, with in-process inspection | Approve the pre-shipment inspection report |
What We Need From You to Start
You do not need to come to us with a finished design. A machine type, working load, and an interface photo is enough to begin. We work from three levels of input:
- Level 1 - Reference machine - an existing chassis you want to replace or improve. We measure, scan, and produce a drawing.
- Level 2 - Interface drawing - a 2D or 3D file of the mounting points and the envelope the chassis must fit into. This is the most common starting point and usually needs the least back-and-forth.
- Level 3 - Performance brief - a written specification of the duty: machine type, gross weight, load distribution, ground condition, working speed, and the environment. We propose the architecture ourselves.
Engineering Tools in Use
SolidWorks for 3D modelling, ANSYS for finite element analysis, and in-house load test rigs to 150T capacity. FEA is run on the frame weldment, roller mountings, and sprocket engagement region, and the report is included with the manufacturing documentation. For simple interface adaptations we may skip full FEA and rely on calculation plus prototype testing, which we will tell you openly at proposal stage.
Design for Manufacture
There is a point where further refinement stops being useful. We flag it when we see it. For a frame that will be built in small batches, a design that is theoretically lighter but requires a unique machining fixture is usually more expensive and less reliable than a slightly heavier design using standard sections. Our aim is a chassis that can be manufactured repeatedly to the same tolerance, serviced with standard tooling, and delivered on the date we committed to.
Cost and Timing of Design Work
Initial feasibility review and the concept proposal are free of charge and normally take two to three working days. Detailed 3D modelling and FEA are included in the order price once you proceed to production. If the design does not proceed, you still own the 3D model and drawings we produced, and we will release them to you on request - the engineering is yours once paid for, whether or not you order from us.
Send us your machine type, working load, and any interface information you have, and we will come back with an initial feasibility view within three working days.
Please leave your customization requirements, and we will contact you as soon as possible!
Leave your requirements, we'll get back to you within 24 hours.















