How is ground bearing pressure calculated for a crawler undercarriage?
Divide the machine's working weight by the total contact area of both tracks: p = (m × g) / (2 × L × B), where m is working mass in kg, g = 9.81 m/s², L is ground contact length and B is shoe width in metres. The result is in pascals; divide by 1,000 for kPa.
For example, a 9,000 kg machine with 2.4 m contact length and 400 mm shoes gives about 46 kPa. Use working mass with attachments, counterweight and fuel, not bare chassis mass.
Two cautions: the published figure is usually nominal pressure on level ground, and with a mast or boom extended the real pressure under the front rollers can be two to three times higher. Check that peak against the site's soil bearing capacity. Wider shoes or a longer frame reduce nominal pressure; see our steel crawler undercarriage options and the parameter guide.
Please leave your customization requirements, and we will contact you as soon as possible!
Leave your requirements, we'll get back to you within 24 hours.















